Preparation of J.K. Wall Putty paste

• Take required quantity of J.K. Wall Putty in a pan. 35-40% water by volume is required to prepare paste of good consistency.
• Mix half of required water quantity into it. Knead/Mix the Putty & wait for few minutes.
• Mix remaining quantity of water to get desired consistency.
• Mix vigorously for 5-10 minutes for making a lump-free and uniform paste.
• Mix the product in such quantities that it should be used within 2 hours of preparation.
• Mixing may be done manually or by using a suitable electric mixer.

Application of J.K. Wall Putty

• Ensure that surface is totally clean
• Ensure that surface plastered or made with cementitious material.
• The surface should be moderately rough and in just-wet condition.
• Apply 1st coat of J.K. Wall Putty (1.5 mm thickness) using a blade / spatula on the wall with a "bottom to up" configuration
• Apply 2nd coat of J.K. Wall Putty (1.0 mm thickness) preferably after 4 hours in summers and after 12 hours in winters. Second coat shall be applied "horizontally" to even out application marks of 1st coat, if any.
• Remove putty paste again for 1 minute, if it is left undisturbed for 30 minutes.
• Allow complete drying for 3 days and then use a fine emery paper to remove application marks, if any.